Boost your Grades with us today! Get your 15% Discount Now!
NR706 Practice Problem Analysis
The purpose of this assignment is to critically evaluate a practice problem. This assignment builds on the Week 4 assignment: Translation Science Project. Information used in the Week 4 assignment may be used as the basis for this assignment. The goal of the assignment is to develop a deeper understanding of the practice issue, using continuous quality improvement tools; specifically, a failure mode & effect analysis (FMEA) of the selected practice problem and an Ishikawa (fishbone) cause and effect diagram to analyze, improve, or mitigate related risks. This assignment will allow for the application of the DNP Essential IV sub-competencies through sequential development of workflow steps in relation to a practice problem and promotion of presentation skills. Assignment content supports the professional formation, communication, and dissemination skills relevant to the DNP practice scholar.
This assignment has four components:
· first, identify a practice problem stated in PICOT format;
· second, conduct a failure mode & effect analysis of the practice problem;
· third, develop an Ishikawa (fishbone) cause and effect diagram to analyze, improve, or mitigate related risks
· and fourth, create a professional power point presentation with speaker notes for each slide to disseminate this information.
This assignment enables the student to meet the following course outcomes:
· CO 4: Evaluate the types of healthcare information systems, knowledge-based systems, and patient care technology and the impact on patient safety, quality of care and outcomes measurement. (PO 7)
· CO 5: Appraise consumer health information sources for accuracy, timeliness, and appropriateness. (PO7)
The assignment title is due by Sunday 11:59 p.m. MT at the end of Week 6. The Late Assignment Policy applies to this assignment.
Total points possible: 250
Preparing the Assignment
Follow these guidelines when completing each component of the assignment. Contact your course faculty if you have questions.
Consider using the same practice problem identified in Week 4: Translation Science Project, including the practice problem, PICOT construction, and background/significance of the problem. Be sure to incorporate faculty feedback from the Week 4 assignment to maximize performance.
2) Review the examples of the Failure Mode and Effect Analysis (FMEA) and Ishikawa (fishbone) Diagram in Week 4, Explore page 2, Evidence-Based Practice: Improving Outcomes.
Use the Failure Modes and Effects Analysis (FMEA) (Links to an external site.) and Ishikawa (fishbone) Diagram template A (Word 2016 or higher) (Links to an external site.) or Ishikawa (fishbone) Diagram template B (Older version of Word) (Links to an external site.) or create your own fishbone diagram addressing the required five areas: (a) people, (b) environment, (c) materials, (d) methods, and (e) equipment to complete these components of the assignment. If you need to update to the current version of Word, click here.
Please submit to the assignment link the completed Week 6 Practice Problem Analysis PowerPoint Presentation with speaker notes for each slide integrating failure mode & effect analysis and fishbone diagrams into the powerpoint answering associated questions. Upload the finished powerpoint with speaker notes to assignment link.
3) Include the following components.
a) Introduction (1 slide)
i) Title of Practice Problem Analysis and Presentation
ii) Student Name
iii) Assignment Title
iv) Professor Name
b) Practice Problem Identification (1-3 slides)
i) State the Practice Problem in PICOT format (1 slide)
ii) Identify all PICOT components
iii) Describe the Background/Significance of the Practice Problem (1-2 slides) (cited)
iv) Identify inclusion criteria for the population
v) Identify exclusion criteria for the population
c) Failure Modes and Effects Analysis (1-2 slides) Identify three steps in the practice problem process with potential breakdown or process gaps
i) Identify at least one potential error that could occur at each of the three process steps (failure mode)
ii) Identify at least one possible cause of failure at each of the three process steps (failure cause)
iii) Identify at least one adverse consequence for each failure identified (failure effect) (see example in course Week 4)
iv) Using a scale of 1-10, rate the likelihood of occurrence of failure at each process step
v) Using a scale of 1-10, rate the likelihood of detection of failure at each process step
vi) Using a scale of 1-10, rate the likelihood of severity or harm if failure were to occur
vii) Calculate the risk profile number (multiply the score related to the likelihood of occurrence of failure x the score related to the likelihood of detection of failure x the likelihood of severity or harm if failure were to occur.
viii) Place completed FMEA form on powerpoint presentation and summarize analysis
d) Ishikawa (Fishbone) Cause and Effect Diagram (1 Slide)
i) Identify people involved in the practice problem
ii) Identify the environment in which the practice problem occurs
iii) Identify the materials used
iv) Identify the methods used
v) Identify equipment used
vi) Summarize cause and effect analysis
e) Conclusion (1 slide)
i) Summarize the purpose and findings of the analysis
ii) Provide and justify the main conclusions
iii) Draw inferences from the quality improvement analysis
f) References (1 slide)
i) Include in-text citations within the PowerPoint
ii) Provide complete matching references in APA format
iii) Includes a minimum of 4 scholarly sources
g) PowerPoint Presentation
i) Uses PowerPoint Template provided
ii) Uses Failure Modes & Effects Analysis Template Provided
iii) Uses Ishikawa Fishbone Cause & Effects Diagram Provided (Version A or B acceptable or create your own diagram addressing required areas)
iv) Presentation includes no more than 14 slides
v) Grammar and Mechanics are free of errors
h) Speaker Notes on PowerPoint Presentation: Create a professional power point presentation of the above components with speaker notes for each slide in which the Practice Problem Analysis is explained
i) Provide clear and easily readable slide presentation
ii) Capture all slide components and answers questions
iii) Present content with legible, comprehensive notes
Week 6: NR706: Practice Problem Analysis and Presentation
|Week 6: NR706: Practice Problem Analysis and Presentation|
This criterion is linked to a Learning OutcomeIntroduction
Requirements: 1. Provides Title of Presentation 2. Introduces Self 3. Identifies Assignment Title 4. Identifies Professor Name
This criterion is linked to a Learning OutcomePractice Problem Identification
Requirements: 1. States the Practice Problem in PICOT format 2. Identifies all PICOT components 3. Describes the Background/Significance of the Practice Problem (cited) 4. Identifies inclusion criteria for the population. 5. Identifies exclusion criteria for the population
This criterion is linked to a Learning OutcomeFailure Modes & Effects Analysis
Requirements: 1. Identifies at least one potential error (failure mode) for each of the three process steps. 2. Identifies at least one potential error (failure cause) for each of the three process steps. 3. Identifies at least one potential adverse consequence (failure effect) for each of the three process steps 4. Rate the likelihood of occurrence of failure at each process step 5. Rate the likelihood of detection of failure at each process step 6. Rate the likelihood of severity or harm if failure were to occur 7. Calculates the risk profile number 8. Summarizes FMEA analysis
This criterion is linked to a Learning OutcomeIshikawa Fishbone Cause & Effects Diagram
Requirements: 1. Identifies people involved in the practice problem 2. Identifies the environment in which the practice problem occurs 3. Identifies the materials used 4. Identifies methods used 5. Identifies equipment used 6. Summarizes cause and effect analysis
This criterion is linked to a Learning OutcomeConclusion
Requirements: 1. Summarizes the purpose and findings of the analysis 2. Provides and justifies the main conclusions 3. Draw inferences from the quality improvement analysis
This criterion is linked to a Learning OutcomeReferences
Requirements: 1. Includes in-text citations within the PowerPoint 2. Provide complete matching references in APA format 3. Includes a minimum of 4 scholarly sources
This criterion is linked to a Learning OutcomePowerPoint Presentation
PowerPoint Presentation Requirements: 1. Uses PowerPoint Template provided 2. Uses Failure Mode & Effects Analysis Template Provided 3. Uses Ishikawa Fishbone Cause & Effects Diagram 4. Presentation includes no more than 14 slides. 5. Grammar and Mechanics are free of errors
This criterion is linked to a Learning OutcomeSpeaker Notes on PowerPoint Presentation
1. Provides clear and easily readable slide presentation 2) Addresses all slide components and questions 3) Presents legible speaker notes supplementing slide content
|Total Points: 250|
Your assignment woes end here!
Who We Are
We are a professional custom writing website. If you have searched for a question and bumped into our website just know you are in the right place to get help in your coursework.
Do you handle any type of coursework?
Yes. We have posted over our previous orders to display our experience. Since we have done this question before, we can also do it for you. To make sure we do it perfectly, please fill out our Order Form. Filling the order form correctly will assist our team in referencing, specifications, and future communication.
Is it hard to Place an Order?
1. Click on the “Order Now” on the Main Menu and a new page will appear with an order form to be filled.
2. Fill in your paper’s requirements in the “PAPER INFORMATION” section and the system will calculate your order price/cost.
3. Fill in your paper’s academic level, deadline, and the required number of pages from the drop-down menus.
4. Click “FINAL STEP” to enter your registration details and get an account with us for record-keeping and then, click on “PROCEED TO CHECKOUT” at the bottom of the page.
100% Reliable Site. Make this your Home of Academic Papers.
Always Order High-Quality Academic Papers from HERE
5. From there, the payment sections will show, follow the guided payment process and your order will be available for our writing team to work on it.
We will process your orders through multiple stages and checks to ensure that what we are delivering to you, in the end, is something that is precise as you envisioned it. All of our essay writing service products are 100% original, ensuring that there is no plagiarism in them. The sources are well-researched and cited so it is interesting. Our goal is to help as many students as possible with their assignments, i.e. our prices are affordable and services premium.
Looking for a Similar Assignment? Order a custom-written, plagiarism-free paper
Your assignment woes end here!